CE FCC ROHS certified repeater cellular Boosters

S10A~S20A repeater are specially designed to help mobile operators to amplify mobile signals in indoor areas where 70%of the mob Name: Band seletive repeater S10A~S20A 10dBm~20dBm Built in Antenna CE certified ROHS certified Description

1.S10A~S20A repeater are specially designed to help mobile operators to amplify mobile signals in indoor areas where 70%of the mobile traffic have been generated.

 

2. It is one of the most successful repeaters that Huaptec has ever developed and supplied over tens of thousands units to more than 10 international operators worldwide. S10A-S20A gets its upgrade versions of T series with remote control software, and DB series to support dual systems. Please check their details in relevant web links.

 

3.It is a SOHO solution with built in antennas, it can effectively increase the acceptance willingness of the property owners as it is elegant looking, compact size for space saving, lower power consumption and can be installed within one hour. Additionally, the built in antennas can be removed so that more antennas can be connected with the repeater to cover larger area.

 

4.They have below recommended coverage sizes:

 

1) S10A: 100~800 square meters.

2) S15A: 800~1500 square meters.

3) S20A: 1000~2000 square meters.

 

5.The band selective repeater design to support any one relevant system of GSM850, GSM900, DCS, PCS; CDMA450, CDMA800, CDMA1900, CDMA2000, WCDMA2100 and AWS.

 

6.The repeater gets quite comprehensive functions:

 

1) Intermediate SAW filter technology for very sharp out of band rejection to amplify only specific operators' signals and reject all the others.

 

2) The repeater can support one or two sub-bands of the mobile system.

 

3) Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance

 

4) To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

 

Repeater kit available with below details:

 

1. Repeater unit with power cord and adaptor.

 

2. External Panel 7dBi as donor antenna.

 

3. 15meter long 5D coax cable with loss of 3~5dB depending on different working frequencies (800~2500MHz).

 

4. Server antennas: built in antenna or indoor wide band omni ceiling antenna 3dBi gain, or indoor wide band panel antenna 7dBi gain.

 

Specifications:

Electrical specification		Uplink	Downlink
Frequency Range	CDMA800	824 ~ 849 MHz	869 ~ 894 MHz
	CDMA1900	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	GSM850	824 ~ 849 MHz	869 ~ 894 MHz
	GSM900 & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
	DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
	PCS	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
	AWS	1710 ~ 1755 MHz	2110 ~ 2155 MHz
Max .Gain	S10A	≥ 60dB	≥ 65dB
	S15A	≥ 65dB	≥ 65dB
	S20A	≥ 65dB	≥ 70dB
Max .Output Power	S10A	≥ 10dBm	≥ 10dBm
	S15A	≥ 12dBm	≥ 15dBm
	S20A	≥ 15dBm	≥ 20dBm
Band width (-3dB)		available upon request
MGC (Step Attenuation )		≥ 31dB / 1dB step
Automatic Level Control		≥ 15dB, auto shut off after 15dB
Gain Flatness	GSM & CDMA	≤3dB (p-p)
	WCDMA	≤2dB/ 3.84MHz
Noise Figure		≤6dB
VSWR		≤2.0
Group Delay		≤4.5μs
Frequency stability		≤0.01ppm
Out of Band Gain & Spurious Emission & Output inter-modulation		GSM Meet ETSI TS 151 026 V 6.1.0
		WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
		CDMA Meet IS95 & CDMA2000
WCDMA System	Spurious Emission Mask	Meet 3GPP TS 25.143 ( V 6.2.0 )
	Modulation Accuracy	≤12.5%
	Peak Code Domain Error	≤-35dB@Spreading Factor 256
	Input inter-modulation	WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
	ACRR	≥ 30dBc/30KHz @ ±5MHz ≥ 50dBc/30KHz @ ±10MHz
CDMA System	Rho	ρ > 0.980
	ACPR	Meet IS95 & CDMA2000
LED Alarm		Standard
Power LED		Power Indicator
ALC LED		Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color
Mechanical Specifications		Standard
I /O Port		SMA-Female
Impedance		50 ohm
Operating Temperature		-25ºC~+55ºC
Environment Conditions		IP40
Dimensions		220x135x67mm
Weight		≤ 2.5Kg
Power Supply		Input AC90~264V,output DC9V / 3A

CE FCC ROHS certified repeater cellular Boosters